Dynamic surface tension measurements of surfactant solutions using the maximum bubble pressure method – limits of applicability

One of the essential differences in the design of bubble pressure tensiometers consists in the geometry of the measuring capillaries. To reach extremely short adsorption times of milliseconds and below, the so-called deadtime of the capillaries must be of the order of some 10 ms. In particular, for concentrated surfactant solutions, such as micellar solutions, short deadtimes are needed to minimize the initial surfactant load of the generated bubbles. A theoretical model is derived and confirmed by experiments performed for a wide range of experimental conditions, mainly in respect to variations in deadtime and bubble volume.     

激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

On the Isoperimetric Type Problems with Current Hyperplanes

Analytical approach is presented to the isoperimetric type problems of finding convex figures separated by current hyperplanes.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

On the spectral picture of an irreducible subnormal operator II

In this paper we show that the spectral picture of an irreducible subnormal operator may be arbitrarily prescribed subject only to certain natural necessary conditions. This completes work begun by the second author.

     

垂直低温两相流管底液氮汽泡上升速度的实验研究

本文对垂直低温两相流管底部液氮汽泡的上升速度运用高速摄像机进行了可视化实验研究,对所采集的实时图像进行处理.在Cole和Mendelson汽泡上升速度经验公式的基础上,通过对液氮汽泡的上升速度的分析,提出了圆管管路底部液氮汽泡的上升速度的拟合公式,分析研究其变化规律,为进一步探求圆管内液氮弹状汽泡的生成机理提供依据.     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.